Procomp BS61M Series Скачать руководство пользователя страница 55

Страница: 55 / 69

BS61M

series

~54~

0 - 4, which primarily differ in timing. When

Auto

is selected, the BIOS will

select the best available mode.

Primary Master/Slave UltraDMA

efault: Auto

Secondary Master/Slave UltraDMA

efault: Auto

Auto, will support the Ultra DMA function. Disabled, will not support the
Ultra DMA function.

IDE Burst Mode

efault: Enabled

Burst mode transfer can improve the access to IDE devices. Enable this item
for improved performance. If your IDE drives cannot support high
performance, or if you feel that too many disk errors are being generated,
disable this item.

Onboard FDC Controller

efault: Enabled

Use this item to turn on or off the floppy disk controller that is built into this
motherboard.

FDC Write Protect

efault: Disabled

To enable/disable the write protection of floppy.

Onboard Serial Port 1

efault: 3F8/IRQ4

User can select serial port IRQ. If set to Auto, system will assign an IRQ for
it. Note : Set to Auto is not recommended.

Onboard Serial Port 2

efault: 2F8/IRQ3

User can select serial port IRQ. If set to Auto, system will assign an IRQ for
it. Note : Set to Auto is not recommended.

IR Address Select

efault: Disable

This item will enable or disable the IR address controller.

Onboard Parallel Port

efault: 378/IRQ7

This item lets you disable the built-in parallel port, or enable it by assigning
an 1/0 address and an Interrupt Request Line (IRQ).

Parallel Port Mode

efault: ECP+EPP

This item defines the operation of the parallel port. As a default it is set to ECP +

EPP. If you are connected to a parallel device that supports the higher-performance

EPP (enhanced parallel port) or the ECP (extended capabilities port) make the

Содержание BS61M Series






































































Результаты поиска

Содержание BS61M Series

Отзывы:

Procomp BS61M Series, Руководство пользователя, Страница: 55 / 69

Результаты поиска

Содержание BS61M Series

Отзывы: