BS61M
series
~24~
If you have to do this, be sure to identify what type of memory is
already installed. In some cases, there may be a mix of module types. You
can confirm this by checking the configuration screen that appears while the
computer is starting up. Press the pause key to temporarily interrupt the
startup process so that you will have enough time to read the screen. When
you're done, press any key to resume startup.
Remove the lowest performance and smallest module and replace it with
the upgrade.
How to Install DIMM Modules on Motherboard
Both the DIMM module that you will install and the SDRAM socket into
which the module will be placed have special notches and nicks that are
designed to prevent modules from being installed incorrectly. To install a
DIMM module, perform the following steps:
1.
Check to ensure the cut-outs on the DIMM edge connector match the
notches in the SDRAM socket—
p in1 on the module should match pin1 on
the socket.
2.
Push down the latches on each side of the SDRAM socket.
3.
Press the module into the socket, pushing it down carefully but firmly so
that it sits correctly. The latches on either side of the socket will be levered
upward and latch on the edges of the module when it is installed correctly.
168-pin DIMM Module
KQ2 KQ3
KQ4
KQ2 KQ
3
KQ4
KQ
2
KQ
3
KQ
4
KQ
2
KQ
3
KQ
4
FAN
1
FAN
2
3V
Ba
tte
ry