manualshive.com logo in svg

Procomp BS61M Series, Руководство пользователя, Страница: 51 / 69

Поделиться
Скачать
Procomp BS61M Series Скачать руководство пользователя страница 51

BS61M

series

~50~

Power Button Over Ride

D

efault: Instant Off

Under ACPI (advanced configuration and power interface) the system can be
turned off mechanically (by the power button) or it can undergo a software
power off. If the system has been turned off by software, the system can be
resumed by a LAN, MODEM or ALARM wake up signal. This item allows
you to define a software power off using the power button. If the value is set
to Instant-Off, the power button will automatically cause a software power
off. If the value is set to Delay 4 Sec. the power button must be held down for
a full four seconds to cause a software power off.

Ring Power Up Control

D

efault: Enabled

When this item is enabled, any activity through an internal modem that is
connected to the Wake On Modem connector can resume the system from a
power saving mode or a software power off.

LAN Power Up Control

D

efault: Enabled

Enabled: If you have installed LDCM administrator software, and any client
side is powered off, you can wake up by LAN through the LDCM
mechanism.

KB Power ON Password

D

efault: Enter

If your system is installed with a keyboard power on capability, this item lets
you add a password that must be typed on the keyboard in order to turn on
the power.

Power Up by Alarm

D

efault: Enabled

If you enabled this item, new fields appear which let you set a date and time
for an alarm that can resume the system from a power saving mode or a
software power off.

Содержание BS61M Series






































































Отзывы:

Нет отзывов