BS61M
series
~48~
Suspend
Monitor blanked when the systems enters the
Suspend mode.
Standby
Monitor blanked when the system enters Standby
mode.
Doze
Monitor blanked when the system enters any
power saving mode.
Video Off Method
D
efault: V/H SYNC+Blank
This determines the manner in which the monitor is blanked.
V/H SYNC+ Blank
This selection will cause the system to turn off the
vertical and horizontal sync. ports and write
blanks to the
video buffer
Blank
This option only writes blanks to the
Screen
video
buffer
DPMS
Initial display power management
signaling
Switch Function
D
efault: Break/Wake
If this item is enabled, it permits the use of a suspend switch (connected to
J17- Other Jumper Setting, See Chapter 2). If the item is set to Break, the
suspend switch puts the system in suspend mode. If the item is set to Break,
the suspend switch puts the system in suspend mode. If the item is set to
Break/Wake, you can press the suspend switch a second time to wake up the
system. If the item is set to Disabled, the suspend switch does not function.
Doze Speed (div by)
D
efault: 2/8
The item defines the clock speed of the CPU when the system is in the Doze
power saving mode. As a default, the CPU will run at a quarter of its rated
speed.
Stby Speed (div by)
D
efault: 1/8
This item defines the clock speed of the CPU when the system is in the
Standby power saving mode. As a default, the CPU will run at a 1/8 of its
rated speed.
MODEM Use IRQ
D
efault: 3
This item determines the IRQ in which the MODEM can be used.
The choice: 3,4,5,7,9, 10,11,N/A.
HDD Off After
D
efault: Disable
You can use this item to set a timeout for a hard disk powerdown. You can set