BS61M
series
~45~
CPU Pipeline Control
D
efault: Enabled
Pipelining allows the system controller to signal the CPU for new memory
addresses even before all data transfers for the current cycle are complete,
resulting in increased throughput.
PCI Delay Transaction
D
efault: Enabled
If the chipset has an embedded 32-bit write buffer to support delay
transaction cycles, you can enable this item to provide compliance with PCI
Ver.2.1 specifications. We recommend that you leave this item at the default
value Enabled.
Auto Detect DIMM/PCI Clk
D
efault: Enabled
If this item is enabled, the unused DIMM and PCI slot clock will be disabled.
If this item is disabled the unused DIMM and PCI slot will still get the active
clock signal.
Spread Spectrum
D
efault: Disabled
Enable / Disable this item the BIOS will Enable / Disable the clock generator
spread spectrum .
CPU Host/ SDRAM Clock
D
efault: Default
There are 16 sets of Host/SDRAM clock, you can choose anyone you want.
If your Intel Pentium
®
CPU doesn't support an external bus speed of 100MHz
or other kind of clock, you can still set your motherboard's external bus speed
to 100MHz or other kind of clock. But we recommend that you follow the
default value.
CPU Clock Ratio Jumpless
D
efault: Disabled
There are 14 sets of CPU clock ratio, you can choose anyone you want. If
you want to overclock the speed of your CPU, you can refer above item –
CPU Host/SDRAM Clock and this item – CPU Clock Ratio to change the
speed of your CPU. But we don’ t promise your system will be stable when
your system under the overclock condition. So we recommend that you
follow the default value.