Procomp BS61M Series Скачать руководство пользователя страница 41 | Manualshive

Страница: 41 / 69

Procomp BS61M Series Скачать руководство пользователя страница 41

BS61M

series

~40~

Boot Sequence

D

efault: A, C, SCSI

This item defines where the system will look for an operating system, and the
order of priority. You can boot an operating system from many locations
including a SCSI device, a ZEP drive, a floppy diskette drive, or an LS-120
high-capacity diskette drive.

Swap Floppy Drive

D

efault: Disabled

This item allows you to determine whether enable the swap floppy drive or
not.

Boot Up Floppy Seek

D

efault: Disabled

During POST, BIOS will determine if the Floppy disk drive installed is 40 or
80 tracks. 360 K type is 40 tracks while 720K, 1.2M and 1.44M drive type as
they are all 80 tracks.

Enabled

: BIOS searches for floppy disk drive to determine if it is 40

or 80 tracks. Note that BIOS can not tell from 720K, 1.2M or
1.44M drive type as they are all 80 tracks.

Disabled

:

BIOS will not search for the type of floppy disk drive by

track number. Note that there will not be any warning
message if the drive installed is 360K.

Boot Up NumLock Status

D

efault: On

This item defines if the keyboard Num Lock key is active when your system
is started.

IDE HDD Block Mode

D

efault: Enabled

This item can let you save the time of hard disk saving or reading data, if you
enable this function.

IDE 32-bit Transfer Mode

D

efault: Enabled

When this item is enabled, the data will be transferred by 32-bit mode,
otherwise the data be transferred by 16-bit mode.

Memory Parity Check

D

efault: Enabled

This item can detect the mistake of memory.

Typematic Rate Setting

D

efault: Disabled

This determines if the typematic rate is to be used. When disabled,
continually holding down a key on your keyboard will generate only one key
instance. In other words, the BIOS will only report that the key is down.

«
...
39
40
41
42
43
...
»

Содержание BS61M Series






































































Отзывы:

Нет отзывов