Proceq Zehntner ZRM 6010, Инструкция по эксплуатации

Страница: 46 / 68

Page 46
13.2 Navigation in the menu
Press and to open the menu. The top bar shows the name of the
currently selected option. Most device options can be configured and switched
on/off from the menu. Refer to chapter 6
”Navigation” on page 17 for instructions on
how to navigate in the menu.
13.3 Measure mode
Selecting “Measure mode” from the menu opens the measurement settings.
By default, R
L
geometry is activated. If
required, this could be changed to R
L15
.
“Auto save measurements” defines, whether all
settings are saved to the archive automatically
or need to be saved individually. If deactivated,
measurements have to be stored manually. By
default, “Auto save measurements” is activated.
“Average” activates average measurement mode. Average measurement mode can
also be activated by pressing directly on the touchscreen when in measurement
mode. “Automatically new average group” creates a new group automatically when
the desired number of measurements has been reached.
13.4 Timers
13.4.1 Wet timer
The Zehntner ZRM 6010 is equipped with a countdown timer to take measurements
exactly at the right time after the road marking has been moistened.
Select “Timers” and “Wet timer” from the
menu to activate the wet timer. Alternatively,
press symbol in measurement mode on
the touchscreen to activate the wet timer.
If the wet timer is activated, the “Timers”
menu shows the current settings for the wet
timer. “Wet timer time” allows to set the
countdown between 2 and 1000 seconds.
“Wet timer mode” allows to select between
“Single” and “Continuous” mode. “Single
activates the timer for one measurement,
“Continuous” keeps it active for each
measurement.
13.4.2 Interval timer
The interval timer can be used to define the performance of the retroreflection of a
marking in dependence on the drained water at wet measurements.