Pro-Line Boats 35 Express 2006, Руководство пользователя

Страница: 77 / 95

70
•
Remove batteries and protect them from freezing. Trickle charge overnight once a
month.
•
Place under cover. If the boat is stored on a trailer, loosen tie-down straps and place
blocks beneath axles to relieve the load on the tires.
For inboard/outboard engines only, to protect your boat during transport, the following procedures were
affected at the factory prior to shipping and will need to be rectified prior to launch:
•
Drain plugs on engine block removed.
•
Petcocks on engine removed.
•
Large hose on re-circulating pump removed.
•
Power steering cooler hose removed.
•
All other water hoses disconnected (left in place with hose clamps tightened to prevent
their loss).
Fitting Out After Storage
•
Check entire fuel system for loose fittings, leaks and damage.
•
Clean battery terminals; install battery(s), and coat terminals with a deoxidizing agent.
•
Check all thru hull fittings and hoses for obstructions, water tightness and condition.
•
Test all lights for proper operation.
•
Check wiring, terminal blocks and plugs for loose connections and corrosion.
•
Verify switch and equipment operation.
•
Check line condition. Inspect anchor and rope.
•
Clean out any debris from bilge and cockpit.
•
Flush water systems.
•
Install hull drain plug.
•
Verify operation of equipment before leaving dock.
Resealing
In the heat and sun, silicone and sealant can degrade over time. We recommend that you reseal around
everything that comes in contact with the deck or hull with a high quality silicone such as 3M 5200 sealant
annually. This includes but is not limited to the following:
Hatches on the top cap Windlass
Port lights Windshield
Mid berth cabin window Bow and transom eyes
Cleats Clam shell at the anchor locker
Bow rail stanchions Thru hull fittings
Hard top stanchions and supports Dive ladder
Grab rails Outriggers
Rubrail Motor mounts
Access and other hatches Cabin door
Additional Cleaning and Maintenance Products
Flitz
For use on brass, copper, stainless steel, chrome, silver, gold, pewter, nickel, factory gun bluing, bonze,
platinum, tin, aluminum, magnesium, anodized aluminum, painted surfaces, fiberglass, Plexiglas and
plastics. Flitz is available at many marine supply stores, marinas and at Home Depot. For more
information on this product, contact the manufacturer at: