Pro-Line Boats 35 Express 2006, Руководство пользователя

Страница: 35 / 95

28
Please refer to the owner’s manual provided by the
manufacturer of the compass for operational procedures and
for information related to the care and maintenance of their
product. When in doubt, always defer to the compass
manufacturer’s instructions and/or recommendations.
Horn
The dual trumpet horn device is located on top of the fiberglass hard top.
The horn switch is located on the switch panel. Depress the horn switch to
the up or forward position to activate the horn, then release the horn switch
to deactivate the horn.
The horn is used to signal, warn or alert other boats or persons on shore. Using different sequences of
horn blasts indicates different and sometimes dangerous situations to you or someone around you.
See the Safety Section in this manual for more information. Avoid any horn use without an appropriate
purpose. Additional information regarding audible warning signals should be covered in a safe boating
course.
Note: If you have selected the optional tower, the fual trumpet horn will be mounted on
the bottom side of the upper station console/helm area.
Full Instrumentation / Gauges
All gauges are installed on the console but the configuration and specific location of your gauges will vary
depending upon the selection of the various optional engine packages. If your engine package includes
analog gauges (i.e., Faria), the gauges will light up when the navigation lights are on. If your engine
package includes digital gauges provided by the engine manufacturer (i.e., Mercury SmartCraft, Honda,
Yamaha, etc.), the gauges will light up only when the engine is on.
Note: For boats rigged with analog gauges (i.e., Faria), the gauge configuration may
include individual gauges for the Temperature, Trim, Volts and Fuel or a multifunction
gauge that includes these 4 gauge functions. For boats rigged with digital gauges, the
Temperature, Trim, Volts and Fuel gauges are incorporated into the Tachometer gauge.
Tachometer
The tachometer (tach) gauges are located on the console. To ensure the tach is working properly, simply
turn the ignition key on and start the engine. While the engine is idling, the Tach should be reading in the
proper rpm range recommended for the engine. Your engine manual will indicate the appropriate rpm
range. When you are running at wide-open throttle, the tach should read near the top end of the
recommended rpm range.
If the rpm readings are working correctly and the engine throttle settings are correct, the tachometer is
operating properly. If the tachometer is not reading correctly, refer to the manual provided by the
manufacturer of the gauge that was included in your owner’s package
Speedometer
The Speedometer (speedo) is located on the console. To ensure that the speedo is working properly, get
the boat on a planing speed and check to see if it is reading at the approximate running speed at which
the boat is traveling.