Pro-Line Boats 35 Express 2006, Руководство пользователя

Страница: 31 / 95

24
10 Washdown – The washdown pump is located below the mid berth on the starboard side and is
mounted on a seacock (ball valve). To activate the pump, depress the switch to the up or
forward position. The washdown pump draws its water from the same seacock that the baitwell
pump draws its water. To turn the pump off, depress the switch in the down position. Keep the
Washdown switch in the “Off” position if the pump is not going to be used soon.
11 Baitwell Pump - The baitwell pump is located below the mid berth on the starboard side and it is
mounted on a seacock (ball valve). For the baitwell pump to operate properly you need to make
sure the seacock is in the open position. The seacock is wide open when the yellow seacock
lever is vertical to the pump. When the yellow seacock lever is horizontal to the pump, the
seacock is closed. Please note that this pump is mounted on its side.
The underside of the seacock thru-hull is equipped with a scoop to allow the water to be picked
up even when the boat is on plane. When the boat is not in the water or the baitwell pump is not
going to be used for an extended period of time, the seacock valve should be in the closed
position.
To activate the pump, depress the switch to the up or forward position. To turn the pump off
after the baitwell tub is full, depress switch to the down or aft position.
12 Fish Box Pump - This switch operates the fish box
macerator pump that allows you to drain the water
and debris from the fish boxes. The macerator pump,
which is connected to the collector box (located in the
center of the bilge), allows you to pump all the water,
ice and scales out of the boxes by grinding up the
debris and discharging it overboard.
To activate the pump manually, depress the switch to
the up or forward position.
This action will drain the fish boxes of water and/or debris, transport it into the collector
box/holding tank and then to the macerator pump to be macerated and/or discharged overboard.
When not in use, the switch should be left in the off or down position. Even though your Pro-
Line is equipped with a true gutter system, sometimes water will accumulate in the fish boxes.
As long as there is power to the fish box macerator pump, the automatic float switches located
in the holding tank will activate the pump and automatically discharge the water overboard.
13 Windshield Wiper(s) – The port and starboard wipers are standard equipment. Press the switch
in the forward or up position to activate the starboard wiper. Depressing the “3 position switch”
to the down or aft position will activate both the port and starboard wipers. The center position
on the switch is the off position for both wipers. See additional information on this component in
the “Windows, Hatches & Doors” section of this manual.
14 Windshield Vent – The switch that operates the windshield
vent is a “3 position momentary switch” which is only active
when the button is depressed. To open the windshield vent,
depress and hold the switch to the up or forward position.
Release the switch when the windshield vent reaches the
desired position. When you are ready to close the
windshield vent, depress the switch in the down position
until the vent window reaches the desired position.
Once the vent has traveled to the full out or full in position, release the switch. See additional
information on this component in the “Windows, Hatches & Doors” section of this manual.