Pro-Line Boats 35 Express 2006, Руководство пользователя

Страница: 49 / 95

42
If you have selected the optional air conditioner system, a designated fuel water separator will also be
installed on the inside of the port stringer specifically for this optional installation.
Primer Bulbs
There is a primer bulb (if applicable) installed for each engine and it is used to prime the fuel pump in the
motor with fuel. Squeeze the primer bulb a few times until resistance is felt in order to prime. If no
resistance develops and the fuel pump will not prime, you may be out of fuel, the primer bulb may be
defective, or a leak may have developed allowing air into the system. The primer bulbs (if applicable) are
located with the rigging tubes where they exit the bilge and are easy to get to by standing on the dive
platform.
Note: Not all engines require primer bulbs. Refer to the engine manual for verification.
Oil Tank and Oil Fill
Depending on your selection of the various optional engine packages (i.e., oil injected outboard engines),
your boat may be equipped with remote oil tanks. If your engine package requires the installation of an
oil tank, it will be installed in the bilge on the starboard side. The oil fill will be installed at the transom on
the port side of the transom door.
Make sure that the oil tanks are well stocked with the type of engine oil that is recommended for your
engines. Refer to your engine manual. It is imperative that the oil supply remains clean and
uncontaminated by water or dirt. Check to make sure the oil lines are free from leaks, kinks and chafing.
Some motors use a primer bulb to initiate oil flow. Air may periodically enter the system and require
purging. Refer to your engine manual for specific instructions.
If your optional engine package requires the installation of remote oil tanks, please refer to the owner’s
manual provided by the engine manufacturer for operational procedures and for information related to the
care and maintenance of their product. When in doubt, always defer to the engine manufacturer’s
instructions and/or recommendations.
Fuel / Oil Leaks
The fuel tank is vented overboard and the vent should be inspected for obstructions regularly. Ensure all
of the fuel hoses remain properly secured and located according to NMMA standards. Inspect all hose
clamps and fittings to ensure they are double clamped where needed and that there are no fuel leaks in
any of the hoses. Also, inspect the oil system, if applicable, and ensure that the oil tank and hoses
remain properly connected and secured.
If you notice a fuel odor or see fuel in the bilge, there may be a leak somewhere in the fuel system.
Correct any fuel leaks before operating the vessel.
Caution: If at all possible , any fuel tank and or fuel system repair should be handled by
your dealer’s service department or by another qualified professional.
Cabin Appliances and Accessories
As standard equipment, your galley comes equipped with the following appliances and electronics:
•
Microwave
•
AC Refrigerator
•
Coffee Maker
•
Flat Screen Television w/DVD Player
•
Electric Stove
•
AM/FM Stereo w/CD Player, Speakers, Remote