41
Note: When a triple engine package is installed, 4 access pies (in lieu of 2) are installed on the dive
platform.
Note: If you have selected the optional tower, access to some components may not be available through
the cockpit storage hatch. Please refer to the related section in the owner’s manual for additional access
information.
Windshield – Tempered Glass with Vent and Actuator
The windshield assembly is constructed of white powder coated aluminum,
tempered glass and acrylic. The windshield vent in the center of the windshield
assembly can be opened and closed to allow air circulation at the helm. The
switch that operates the windshield vent is a 3 position momentary switch, which
is only active when the button is depressed.
To open the windshield vent, depress and hold the switch in the up or forward
position. Release the switch when the windshield vent reaches the desired
position. When you are ready to close the windshield vent, depress the switch in
the down position until the windshield vent has closed or reached the desired
position. Once the vent has traveled to the full out or full in position, you should
release the switch.
Windshield Wipers – Port and Starboard
The port and starboard wipers are standard equipment on your Pro-Line. Depressing the 3-position wiper switch
to the up or forward position activates the starboard wiper. Depressing the 3-position switch to the down or aft
position will activate both the port and starboard wipers. The center position on the switch is the off position for
both wipers. If at all possible you should try never to run the wipers on a dry windshield. This will dramatically
reduce the life of your wiper blades.
Windows
To allow for proper ventilation, 3 styles of windows have been installed throughout the cabin and cockpit:
Windows/Hatches Installed on Fiberglass Hard Top – Two (2) small windows/hatches are installed on the
fiberglass hard top. To open the window, pull the black lever aft and push the hatch open to the desired position.
To hold the hatch in place, tighten the black plastic knobs on the support arms. To close the window, loosen the
black plastic knobs on the support arms and allow the window to move back to the closed position. Then, push
the lever forward to secure the hatch. The hatches should be in the closed and latched position when the vessel
is underway.
Exterior View
Interior View
Note: The hatches in the fiberglass hard top are not available with the installation of the optional
tower.
