Pro-face PS-4600 Series, Руководство пользователя

Страница: 54 / 196

Dimensions/Assembly
54
Rear Mount Models
Step Action
1 Check that the gasket is correctly attached to the Industrial Personal Computer.
NOTE: When checking the gasket, avoid contact with the sharp edges of the
Industrial Personal Computer frame, and insert it completely into its groove.
2 Insert the Industrial Personal Computer into the back of the smooth, flat installation
panel opening
(see page 50) .
3 From the front, fasten the Industrial Personal Computer (using a torque 0.5 Nm
[4.5 lb-in]) to the installation panel with 6 counter sink screws (2x M5 and 4x M6).
The screws must be long enough to secure them with nuts on the opposite side.