Pro-face PL-5910 Series, Руководство пользователя

Страница: 14 / 184

Preface
13 PL-5910 Series User Manual
UL/c-UL/CSA Application Notes
CE Marking Notes
The PL5910-T41-24V/PL5911-T41-24V Series units are UL/c-UL/CSA 60950
recognized products. (UL File No. E171486). Please pay special attention to the
following instructions when applying for UL/c-UL/CSA approval for machinery which
includes any of these PL units.
Equipment with a PL mounted in it requires UL evaluation for the combination of the PL
and the equipment.
The PL conforms as a component to the following standards:
UL 60950-1
Third Edition, dated December 1st, 2001 (Standard for Safety of Information Technol-
ogy Equipment)
CAN/CSA-C22.2 No. 60950-1-03
Third Edition, dated December 1st, 2001 (Standard for Safety of Information Tech-
nology Equipment)
PL5910-T41-24V (UL Registration Model: 3382701-01)
PL5911-T41-24V (UL Registration Model: 3382701-02)
When the PL unit is a built-in component of another product:
• The rear face of the PL unit is not an approved enclosure. When building the PL into
another product, that product should be designed so as to meet standards for an
approved enclosure.
• Use the PL indoors only.
• When using natural air ventillation, be sure to install the PL unit in a vertical panel.
Also, be sure to create at least 50mm of air space around the rear face of the PL
unit. If this amount of space is not created, the PL unit's internal temperature will
increase and may lead to the unit's failing to meet UL standards.
• When connecting the PL unit’s power cord, be sure to use a cord that is appropriate for
the current and voltage used, and that has conductive wires that are 0.75 mm 2 or larger.
• When an end-use product will include the PL, be sure to design the PL unit’s power
cutoff switch as a separate disconnect device and locate it where the operator can
easily reach it.
• Danger of explosion if backup battery is incorrectly replaced. Replaced only with
same or equivalent type recommended by the manufacturer. Dispose of used batter-
ies according to the manufacturer’s instructions.
The PL5910-T41-24V/PL5911-T41-24V Series units are CE marked products that
conform to EMC directives EN55011 (Group 1 Class A) and EN61000-6-2.