Pro-face PL-5910 Series, Руководство пользователя

Страница: 80 / 184

Chapter 5 - System Setup
5-11
PL-5910 Series User Manual
Item Help
Menu Level
Selecting INTEGRATED PERIPHERALS SETUP menu item Displays the following screen.
On-Chip Primary PCI IDE
Designates the internal IDE port's setting. The two selections available are
[Disabled] and [Enabled]. The [Enabled] selection is factory set and recom-
mended for most users.
IDE Primary Master (Slave) PIO
Designates the Primary Master Drive's PIO (Programmed Input/Output) Operation
Mode. The selections available are [Auto], [Mode0], [Mode1], [Mode2], [Mode3],
or [Mode4]. The [Auto] selection is factory set and recommended for most users.
If the On-Chip Primary PCI IDE setting is set to [Disabled], this setting can not be
changed.
IDE Primary Master (Slave) UDMA
Designates the Primary Master Drive's UDMA Operation Mode. The two selections
available are [Auto] or [Disabled]. The [Auto] selection is factory set and recom-
mended for most users. If the On-Chip Primary PCI IDE setting is set to [Disabled],
this setting can not be changed.
USB Controller
Select [Enabled] or [Disable] when attaching a USB device. The [Disabled] selection is
factory set and recommended for most users. When using the USB I/F or the USB
connector for connecting the touch panel, set this item to “Enabled”.
On-Chip Primary PCI IDE [Enabled]
IDE Primary Master PIO [Auto]
IDE Primary Slave PIO [Auto]
IDE Primary Master UDMA [Auto]
IDE Primary Slave UDMA [Auto]
USB Controller [Enabled]
USB Keyboard Support [Auto]
USB Mouse Support [Disabled]
Init Display First [PCI Slot]
Onboard LAN1 [Enabled]
IDE HDD Block Mode [Enabled]
Onboard FDC Controller [Enabled]
Onboard Serial Port 1 [3F8/IRQ4]
Onboard Serial Port 2 [2F8/IRQ3]
Onboard Parallel Port [Disabled]
Parallel Port Mode [SPP]
EPP Mode Select [EPP1,7]
ECP Mode Use DMA [3]
Onboard Serial Port 3 [3E8/IRQ11]
Onboard Serial Port 4 [2E8/IRQ10]
Phoenix First BIOS
(tm)
Desktop CMOS Setup Utility
Integrated Peripherals
↑↓→← :
Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
5.2.5 Integrated Peripherals