Pro-face PL-5910 Series, Руководство пользователя

Страница: 83 / 184

Chapter 5 - System Setup
5-14
PL-5910 Series User Manual
Selecting the POWER MANAGEMENT SETUP menu item calls up the following screen.
↑↓→←
:
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Phoenix First BIOS
(tm)
Desktop CMOS Setup Utility
Power Management Setup
Item Help
Menu Level
ACPI Function [Enabled]
Power Management [User Define]
Video Off Method [DPMS]
Video Off In Suspend [Yes]
Suspend Type [Stop Grant]
Suspend Mode [Disabled]
HDD Power Down [Disabled]
Wake-up by PCI card [Disabled]
**Reload Global Timer Events**
Primary IDE 0
[Disabled]
Primary IDE 1 [Disabled]
FDD,COM,LPT Port [Disabled]
PCI PIRQ[A-D]# [Disabled]
ACPI Function
Enables/disables the ACPI feature. Selections are [Enabled] or [Disabled]. [Enabled] is
factory set. If your PL unit's OS is ACPI compatible, be sure to set this setting to
[Enabled].
Power Management
You can choose from three power management options. These are [User Define], [Min
Saving] or [Max Saving]. The [User Define] selection is factory set and recommended
for most users.
Video Off Method
This setting determines the method to blank the display screen. The available settings are
[Blank Screen], [V/H SYNC+Blank], and [DPMS]. The [V/H SYNC+Blank] blanks
the display and also suspends the Vertical/Horizontal synchronization signal of the
display. The [Blank Screen] selection blanks the display. The [DPMS] selection controls
the operation when a CRT that supports DPMS
*1
is used. The factory default setting is
[DPMS] and is recommended for most users.
Video Off In Suspend
Designates how the monitor is blanked. The available settings are [Yes] and [No]. The
factory default setting is [Yes].
5.2.6 Power Management Setup
*1 This standard is approved by the VESA (Video Electronics Standards Association).