FP2600-T41 User Manual
Specifications
2-6
Pin
No.
Signal
Name
Condition
Pin Location
1
CD
Carrier Detect (FP->Host)
2
RD
Receive Data (FP->Host)
3
SD
Send Data (FP<-Host)
4
DTR
Data Terminal Ready (FP<-Host)
5
GND
Ground
6
DSR
Data Set Ready (FP->Host)
7
RS
Request to Send (FP<-Host)
8
CS
Clear to Send (FP->Host)
9
NC
No connection
Concerning Signal Names
Signal names used for the serial interface on FP units are designed to match
the pin order used on most PC serial interfaces, so that a straight cable can
be used to connect the two. Therefore, connect each pin's signal to the same
signal name on the PC side.
For example, pin #2 'RD' should be connected to the 'RD' input terminal on
the PC's connector.
Refer to section "2-4 Cable Diagrams" for each signal's direction.
2-3-2 Serial Interface
Pin Assignments and Signal Names for Serial Interface
Connector:
Dsub 9 pin female
Connector set screw:
Inch type (4-40)
Serial Interface
Baud rate: 9600 bps
Data length: 8 bits
Parity: none
Stop bit: 1
6
9
1
5
Содержание FP2600-T41
Страница 1: ...FP2600 T41 User Manual Digital Electronics Corporation...
Страница 45: ...Touch Panel Commands 4 8 FP2600 T41 User Manual MEMO...
Страница 53: ...Maintenance FP2600 T41 User Manual 6 4 MEMO...
Страница 57: ...iv FP2600 T41 User Manual MEMO...