pro bel TX 520, Руководство пользователя

Страница: 29 / 237

HU-TX500-TECH
29
TX500 series technical manual
4.2 Main Frame control connections
PGM OUT
BUS 1
BUS 2
EXP
OUT
MON 2
OVER3
OVER 1
PGM IN
MON 1
C/F
PST IN
OVER2
OVER4
OFF
AIR
AUX 1
AUX 2
EXP
IN
ETH
AES EXP
CONTROL
GPI CONTROL
DVE
TO
FROM
FROM
F/S
TO
ANALOGUE
REF
LTC &
AES REF
PGM OUT
1
2
3
1 2
CLEAN FEED
PVW PVW PVW
O/P O/P O/P
PST
OUT
KEY KEY KEY
FILL FILL FILL
DSK 1 DSK 2 DSK 3 DSK 4
PGM IN
PST IN
1447 TX 4 KEYER UNBAL
4.2.1 Breakout cable
Many of the control connections to the TX500 series main frame are via a 78 way D type
connector, labeled ‘CONTROL’, which uses a break-out cable to provide individual 9, 15 and
25 way D type sockets to interface with the appropriate equipment. The break-out cable can
be supplied with the switcher and will have all connectors labeled. All connections have been
designed to use pin to pin cables from the break-out cable to the equipment under control.
An alternative break-out cable is available which is supplied with unterminated ‘tails’ on 3
metre cables so that the user may use their own patch field.
The connections available on the break-out cable are as follows:
•
9 way D type sockets:
•
Under Monitor Displays
•
Automation
•
External router or Aurora*
•
Fader panel 1
•
Fader panel 2
•
DVE (9 way plug for direct connection in same frame)
•
VTR 1 or PST VTR**
•
VTR 2 or AUX VTR**
•
VTR 3 or RS422 Router**
•
15 way D type sockets:
•
Control panel 1
•
Control panel 2
•
25 way D type socket:
•
GPIs 1 to 16