Printed in U.S.A. 1/06 © 2006
4
625-505revI-EN
Steamer
625-MCD & MFY
Programming Product Name and Water Cycle
The Program button menus can be changed to any of the following menu
items.
PROD1 thru PROD12 can be selected to program additional product
names.
“– – – –” can be used when no product name selection is desired.
Filet
Large
PROD1
PROD2
PROD3
PROD
4
PROD5
PROD6
PROD7
PROD8
PROD
9
PROD10
PROD11
PROD12
– – – –
B. Press the UP or DOWN Arrow button to scroll through the
product selections.
C. Press the RAPID STEAMER LOGO button to store the new
product name.
To enter custom product names, proceed to Step 3.
NOTE: Pressing the PRODUCT 3 button at any time exits the
Program Mode without storing the change.
2
A. Press the UP or DOWN Arrow button to change the left-most
character.
B. Press the PRODUCT 1 or PRODUCT 4 button to move the
cursor to the next character.
C. Repeat Steps 4A and 4B for each character.
D. Press the RAPID STEAMER LOGO button to store the new
product name.
NOTE: Pressing the PRODUCT 3 button at any time exits the
Program Mode without storing the change.
4
A. Press the UP or DOWN Arrow button to change the valve
ON time.
B. Press the RAPID STEAMER LOGO button to store the new
valve ON time.
NOTE: Pressing the PRODUCT 3 button at any time exits the
Program Mode without storing the change.
6
A. Press and hold the RAPID STEAMER LOGO button and a
PRODUCT button for approximately 6 seconds. The display
will show the current assigned product for the button pressed.
NOTE: A decimal point will appear and flash on the right side of
the display to indicate Program Mode.
1
Press and hold the PRINCE CASTLE LOGO button first, then
press and hold the RAPID STEAMER LOGO button for 6 seconds.
The display will show the product name with the left-most
character display or decimal point flashing.
NOTE: Must be in Program Mode (see Step 1A).
3
The display now shows the product’s water valve ON time in
seconds.
5
The display now shows the product’s water valve OFF time in
seconds.
7
