625-505revI-EN
17
Printed in U.S.A. 1/06 © 2006
Steamer
625-MCD & MFY
When
Monthly
Tools
McD
®
All Purpose Super
Concentrate (APSC)
McD
®
Sink Pak Sanitizer
McD
®
Delimer™ (as required)
Clean Sanitized Towel
16 oz Cup
Steamer Brush
Protective Gloves
Monthly Cleaning
1.
Turn unit power On/Off switch to OFF position and unplug steamer
from power source. “PROCEED WITH CAUTION” – CAUTION UNIT
IS STILL HOT.
2.
While wearing protective gloves, remove top cover, top cover plate
and venturi plate and wash in a solution of McD
®
APSC made up in
the back sink. Rinse with clean water, sanitize with McD
®
Sink Pak
Sanitizer (KAYQUAT
®
), and air dry.
3.
Using a 16 oz cup, dissolve one packet of McD
®
Delimer™ with 16
oz of hot water. Pour the delimer into the steam chamber. Add more
water as necessary to cover the base of the steam chamber.
NOTE: Use one packet for monthly cleaning procedure and
dispose of the unused solution once the procedure is
completed. In hard water areas that require daily, biweekly or
weekly cleaning, partial packets can be used. Two teaspoons of
McD Delimer™ can be dissolved in a small coffee cup with hot
water. The packet can be used for 4 applications. However it is
not recommended to leave open packets lying around.
4.
With the delimer in the steam chamber, clean the water tube. Dip a
steamer brush in the delimer. Insert the brush about 1" into the water
tube. Scrub the tube for 30 seconds. This will clean the water tube
walls and remove any debris.
5.
Let the delimer solution soak for at least 15 minutes.
6.
Using a clean sanitized towel, wipe the delimer solution from the
steam chamber. Rinse the chamber with clean water and wipe again
with a clean sanitized towel to remove any remaining delimer residue.
If deposits remain, make fresh solution and repeat Steps 3 – 6.
7.
Wash all external surfaces of the steamer with a solution of McD
®
APSC at the back sink. Using the McD
®
APSC spray bottle, spray
directly onto a clean sanitized towel and wipe the unit clean. DO NOT
SPRAY DIRECTLY ON THE UNIT OR USE ABRASIVE CLEANERS.
8.
Reassemble the steamer.
9.
Turn unit on. When unit is preheated, run a minimum of four cycles to
prime the unit and remove any residual cleaner.