Primes HP-MSM-HB, Оригинальное руководство пользователя

Страница: 73 / 149

73 Revision 00 EN - 01/2021
HP-MSM-HB
35,0(6
17 Transport or Storage
NOTICE
Damage/destruction of the optical components due to contamination or hard shocks
Contamination can damage or destroy the optical components. Hard knocks or dropping
can damage the optical components.
X
The device must only be transported with a mounted transport lock.
X
To avoid contamination, please cover the aperture with the provided lid or optical tape.
X
Store the device in the original PRIMES transport box.
Please note before storing devices:
NOTICE
Damage/destruction of the device caused by leaking or freezing cooling water
Leaking cooling water can damage the device. Storing the device at temperatures near or
below freezing and without emptying the cooling circuit completely can damage the device.
X
Empty the lines of the cooling circuit completely.
X
Do not use compressed air to drain the cooling circuit of the PowerLossMonitor.
However, you are welcome to use compressed air to drain the HP-MSM-HB.
X
Even when the lines of the cooling circuit have been emptied, a small amount of residual
water will remain in the device at all times. This may leak out and end up inside the device.
Close the connector plug of the cooling circuit with the included sealing plug.
X
Store the device in the original PRIMES transport box.
17.1 Installing the transportation clamp
The transportation clamp secures the camera cassette to the base plate of the device and prevents misalign-
ment of the axes due to mechanical influences. The misalignment of the camera cassette has a direct influ-
ence on the adjustment of the fiber bridge.
X
Installing the transportation clamp
1. Move the device into the parking position via
software (LDS) (menu: Presentation-> Posi-
tion-> Move to parking position).
2. Install the transportation clamp with three
M4x10 cylinder head bolts.
Transportation Clamp