Primes HP-MSM-HB, Оригинальное руководство пользователя

Страница: 52 / 149

52
Revision 00 EN - 01/2021
HP-MSM-HB
35,0(6
13.5 Flowchart of a measurement
13.5.1 Prepare measurement
Yes
ok
Too
low
Too high
No
Search caustic
settings
Select Magnification
Low x 0.3
on the device
Increase laser
power
Increase
filter
Set laser power on
minimum
Positioning z-axis:
HP-MSM-HB = 60 mm
HP-MSM-HB20kW= 20mm
1. mea-
surement
with largest
window
Beam
found?
Check
saturation
S/N
Preparation
Check alignment
again
Laser beam is
switched on?
OD filter is
selected?
13.5.2 Set caustic limits
No Yes
Increase
z-axis value
Increase z-axis value
until the beam fits into
the biggest window
Upper limit value for
the caustic measure-
ment found
Decrease the z-axis
value until the beam fits
to the biggest window
Increase the z-axis value
until the beam fits to the
biggest window
Lower limit value for the
caustic measurement
found
Increase z-axis value
until the beam fits into
the biggest window
Upper limit value for the
caustic measurement
found
Decrease z-axis value
until the beam fits the
biggest window
Lower limit value for
the caustic measure-
ment found
Beam fits
into the
biggest win-
dow
Search caustic
settings
Start first
caustic measure-
ment
Beam gets smaller
Beam gets bigger