
these appears if only one piece is selected for playback; it makes a big
difference if a
Play All
sequence is playing!
•
To set the piece or sequence to stop repeating
, watch the top left
corner of the screen and press
Repeat 1/All
until the “no repeat”
symbol appears.
Make the piece or sequence play as background music
by pressing the left
arrow button.
A piece or sequence playing as background music normally plays once and
stops.
If “repeat one” or “repeat all” mode is in effect (see above), the piece or
sequence will repeat just as it would if you remained in the audio playback
screen.
Whether background music is set to play once and stop or to play
continuously, you can stop and restart it with the
Background Music
button.
When playing back a still image, you can —
Magnify and de-magnify the image
with the
Zoom
buttons.
Press the
Zoom
“plus” button once to view the image at the first step of
magnification. This is approximately 2X if the image is small, less if the image
is large.
A zoom indicator is shown in the top left corner of the screen whenever an
image appears at any size but its normal size.
To increase the magnification level, press the
Zoom
“plus” button again. Three
levels of magnification are available (not including normal size).
To decrease the magnification level, press the
Zoom
“minus” button.
Large images can also be reduced. To reduce an image, press the
Zoom
“minus” button when the image is displayed at normal size. To restore it to
normal size, press the
Zoom
“plus” button.
•
Use the arrow buttons to pan the zoomed picture.
Each arrow button moves the viewframe in the direction marked on the
button.
Rotate the image
with
Rotate
.
Each press of
Rotate
turns the image clockwise 90 degrees. The fourth press
returns the image to its original orientation.
You can zoom the image when it is rotated and rotate it when it is zoomed.