Accent 1000 User’s Guide-Empower
26
Port Cover:
If a port cover is attached to your device, and the front
device frame is held in place with screws, remove the top frame screws.
2.
Align the holes in the reflector with the empty holes in the handle,
port cover, or NuPoint module.
Important!
Make sure the reflective shield is aimed downward
toward the back of the device, as shown in step 3.
3.
Insert the appropriate screws in the holes, as shown.
Handle or Port Cover
Remove these two screws, if present
Reflector side
pointing downward
Insert
short screw
Insert
short screw