Precor 9.45, Руководство по обслуживанию

Страница: 43 / 58

9.45, 9.45i Treadmill
Page 43
29. Connect the red wires disconnected in Step 3 to the limit switch terminals.
30. Choose one:
If... Then... Otherwise...
You are replacing more Continue with the next Skip to Step 38
than one limit switch step (to replace the
lower limit switch) or
skip to Step 35 (to replace
the zero sense switch)
Replacing the Lower Lift Limit Switch
31. Position the limit switch at its mounting location.
32. Replace the screws and washers that secure the limit switch to the switch bracket.
33. Connect the black wires disconnected in Step 6 to the limit switch terminals.
34. Choose one:
If... Then... Otherwise...
You are replacing the Continue with the next Skip to Step 38
zero sense switch step
Replacing the Zero Sense Switch
35. Position the limit switch at its mounting location.
36. Replace the screws and washers that secure the limit switch to the switch bracket.
37. Connect the blue wires disconnected in Step 9 to the switch terminals.
38. Calibrate the lift assembly as described in Procedure 4.1 of this appendix.
39. Check the operation of the treadmill as described in Section Three of this appendix, then
replace the hood as described in Procedure 5.1 of the Residential Treadmill Service
Manual.