PRECISION DIGITAL ProVu PD7000, Инструкция по эксплуатации

Страница: 30 / 40

P
RO
V
U
™ PD7000 Temperature Meter
Instruction Manual
30
Advanced Features Menu
To simplify the setup process, functions not needed
for most applications are located in the
Advanced
Features menu.
Press and hold the Menu button for three seconds to
access the advanced features of the meter.
Advanced Features Menu &
Display Messages
The following table shows the functions and
messages of the
Advanced Features menu in the
order they appear in the menu.
Display Parameter Action/Setting
Adjust
Adjust Set adjust value to
offset temperature
reading
T cal
T Cal
Enter temperature
calibration menu
T lo
T Low Apply the low
temperature input
(e.g. 32
° F)
T Hi
T High Apply the high
temperature input
(e.g. 1000
° F)
rtdtot
RTD Total Set the number of
RTDs connected in
parallel to obtain
average temperature
filtEr
Filter Set noise filter value
bypASs
Bypass Set filter bypass value
Round
Round Set the rounding value
for display variables
seriAl
Serial Set serial
communication
parameters
SlaV Id
Slave ID Set slave ID or meter
address
baud
Baud rate Select baud rate
Tr dLY
Transmit
delay Set transmit delay for
serial communication
Display Parameter Action/Setting
Parity
Parity Select parity
Even, Odd, or None
with 1 or 2 stop bits
t-byt
Time byte Set byte-to-byte
timeout
SelEct
Select Enter the Select menu
AoutPr
Analog
output
programmin
g Program analog output
parameters
Source
Source Select source for the
4-20 mA output
O-rang
Overrange Program mA output for
display overrange
u-rang
Underrange Program mA output for
display underrange
Break
Loop Break Set relay condition if
loop break detected
nmAx
Maximum Program maximum mA
output allowed
nmin
Minimum Program minimum mA
output allowed
Calib
Calibrate Calibrate 4-20 mA
output (internal
reference source used
for scaling the output)
4 nmA
4 mA output Enter mA output value
read by milliamp meter
with at least 0.001 mA
resolution
20 nmA
20 mA
output Enter mA output value
read by milliamp meter
with at least 0.001 mA
resolution
user
User I/O Assign function keys
and digital I/O
F1
F1 function
key Assign F1 function key
F2
F2 function
key
Assign F2 function key
F3
F3 function
key Assign F3 function key
F4
F4 function Assign F4 function
(digital input)
dI I
Digital input
1 Assign digital input
1- 8, if expansion
modules are
connected
dO 1
Digital output
1 Assign digital output
1- 8, if expansion
modules are
connected
ICal
Internal temp
calibration Enter internal
temperature calibration
(used for factory
calibration only)