5
Description of the terminals (luster terminals)
220V
- ac power ~0V from the mains
Traf Ext.
- ac power ~ 0V for external transformer, passed through the fuse on
the board; if using an external transformer, remove the jumper "~ 6V".
Caution: The cables with voltage of ~ 220V power outlet to be only connected
in the terminal "220V".
~ 16V ~
- ac power supply ~ 6V/30W from an external transformer
+ Bt -
- plus and minus of the battery
Ld
- led "status" for indicating of operating mode, connects between
Ld
and
Aux
(+ V), with a plus to the
Aux
Aux
- + V power supply for external sensors, two luster terminals
Bell
- siren connects between plus of the battery
Bt +
and
Bell
C
- common, ground, chassis, minus of the power supply
G
- Green for the bus
Y
- Yellow for the bus
LG
- led GsM, led for status indication of the GsM module, connects between
LG
and
Aux
(+ V), with plus to
Aux
; this led is duplicated on the board;
C
- common, ground, chassis, minus of the power supply
