background image

Limited Warranty 

67 

 

Dear Valued Customer: 

 

The Powerhorse Product you just purchased is built with the finest material and craftsmanship.  Use this product properly and enjoy the 
benefits  from  its  high  performance.    By  purchasing  a  Powerhorse  product,  you  show  a  desire  for  quality  and  durability.    Like  all 
mechanical equipment this unit requires a due amount of care.  Treat this unit like the high-quality piece of machinery it is.  Neglect and 

improper handling may impair its performance.  Please thoroughly read the instructions and understand the operation before using your 
product.  Always contact Powerhorse Product Support at 1-866-443-2576 prior to having any service or warranty work performed, as 
some services performed by parties other than Powerhorse approved service centers may void this warranty.  This warranty is in lieu of 
any other warranty expressed or implied and Powerhorse assumes no other responsibility or liability outside that expressed within this 
warranty.

 

Limited Warranty 

 

Powerhorse shall warranty any

 

piece of equipment manufactured, or parts of equipment manufactured, to be free from defects in material 

or workmanship for a period of: 

 

Powerhorse Warranty 
Item # 

Consumer Warranty Period 

Commercial Warranty Period 

74006 

2 years from date of purchase by user 

90 days from date of purchase by user 

 

 

“Consumer use” means personal residential household use by a consumer. “Commercial

 

use” means all other uses, including use for 

commercial, income producing or rental purposes or when purchased by a business. 

 

This warranty applies to the original purchaser of the equipment (verification of purchase, in the form of a receipt, is the responsibility of 
the buyer), is non-transferable, and covers parts and labor.  Parts will be replaced or repaired at no charge, except when the equipment 
has failed due to  lack  of proper  maintenance.   If  a part  is no longer available, the part may  be replaced with a similar part of equal 
function.  Any misuse, abuse, alteration or improper installation or operations will void warranty.  Determining whether a part is to be 
replaced  or  repaired  is  the  sole  decision  of  Powerhorse.    Powerhorse  will  not  provide  for  replacement  of  complete  products  due  to 
defective parts.  Any costs incurred due to replacement or repair of items outside of a Powerhorse approved facility is the responsibility of 

the buyer and not covered under warranty. Transportation costs to and from service center is the responsibility of the customer.   

 

In addition to the normal warranty, Powerhorse shall warrant any normal wear item from defects in material or workmanship for a period 

of 90 days from the date of purchase by user.  Normal wear items include, but are not limited to, filter elements. 

 

This warranty specifically excludes the following; failure of parts due to damage caused by accident, fire, flood, windstorm, acts of God, 
applications not approved by Powerhorse in writing, corrosion caused by chemicals, use of replacement parts which do not conform to 

manufacturer’s specifications, damage to accessory parts such as starting batteries,

 

damage related to rodent and/or insect infestation 

and damage caused by vandalism.  Additional exclusions: loss of running time, inconvenience, loss of income, or loss of use, including 
any implied warranty of merchantability of fitness for a specific use.  Also, Outdoor Power Equipment needs periodic parts and service to 
perform well, and this warranty does not cover instances when normal use has exhausted the life of a component or the engine.   

 

This warranty does not cover any personal injury or damage to surrounding property caused by failure of any part. Repair or replacement 
of parts does not extend the warranty period. 

 

The engine warranty is covered under the  same terms and conditions as outlined  above. Normal engine maintenance  such as spark 

plugs, air filters, adjustments, fuel system cleaning and obstruction due to build up is not covered by this Powerhorse warranty.   

 

Please fill in the following information and have it on hand when you call in on a warranty claim. 

 

 
Customer Number: ______________________________________________________________ 

 
Date of Purchase: _______________________________________________________________ 
 
Powerhorse Serial Number: _________________________________________________________ 
 
Item Number: __________________________________________________________________ 

Содержание 74006





































































Отзывы: