Powerhorse 74006, Руководство пользователя

Страница: 42 / 68

Operation
42
Connect Parallel
Cables 1. Turn off both generators.
2. Connect the parallel operation cable in the correct orientation with the red
plug on the left and the black plug on the right to their corresponding parallel
operation outlets designated with the red O-ring and the black O-ring on
each of the generator control panels.
3. Connect the parallel operation cable with the white plug to the parallel
operation outlet designated with the white O-ring on each of the generators.
4. Connect the remaining green/yellow grounding cable to the grounding post
on each of the generator control panels using the terminal ring.
WARNING:
Never connect or remove the parallel operation cables when one or both
generators are running.
Starting the
Generators
1. Start one generator and make sure that the output indicator light on the
control panel is green.
2. Start the second generator and make sure that the output indicator light on
the control panel of the second generator is green.
Connecting
Appliances 1. Plug an appliance into the appropriate receptacle on one of the generators.
2. Turn on the appliance.
Note: If either generator is overloaded, or if there is a short circuit in a connected
appliance, the overload indicator (red light) on the control panel will go ON. The
overload indicator (red light) will stay ON, and after about 4 seconds, current to the
connected appliance(s) will shut off, and the output indicator (green light) will go
OFF. Stop both generators and investigate the problem. Determine if the cause is a
short circuit in a connected appliance or an overload. Correct problem and restart the
generators. Substantial overloading may damage or shorten the service life of the
generator.
Note: For single generator operation, the parallel operation cable must be removed.
WARNING:
Never connect or remove the parallel operation cables when one or both
generators are running.