Powerhorse 74006, Руководство пользователя

Страница: 38 / 68

Operation
38
3. Starting the Generator
After you have completed the pre-start checklist procedures, you are ready to start the generator.
To start the engine:
1) Turn the ESC throttle switch to “ Standard ” .
2) Turn the Main Switc h to “ON”:
a. Ignition circuit is switched on.
b. Fuel is switched on.
c. Choke is switched on
NOTICE:
The engine choke is controlled electronically to start the engine
3) Electric Start – Push and release the engine switch on the control panel to start engine or proceed to Step
4) Recoil Start.
CAUTION:
Make sure the intervals between pressing the switch are longer than 10 seconds. The engine electric
start motor requires 10 seconds to cool between uses. This will also help extend the battery life.