PowerBoss Armadillo 9X Скачать руководство пользователя

Страница: 28 / 96

Armadillo 9X Sweeper #4100033 Rev. D 07/15

Page 28

DIRECTIONAL CONTROL PEDAL

The directional control pedal controls the speed and

direction of the machine. It is also used for slowing the

machine or stopping.

•

To propel the machine forward, apply pressure

to the front of the pedal, increasing pressure to

increase speed.

•

To propel the machine backward, apply pressure

to the rear of the pedal.

•

To slow or stop the machine, release pressure to

the pedal. This is neutral position.

•

For emergency stops, quickly move the foot pedal

past neutral position in the opposite position.

CAUTION

Constant use of the “emergency stop” method

of braking may result in damage to the drive

components.

The sweeper is equipped with a speed limiter. A stop is

mounted under the directional control pedal and can be

raised to reduce the maximum speed.

PARKING BRAKE

The Parking Brake is located on the left side of the

front wall of the operator’s compartment. This brake

manually engages the hydraulic drum brakes (operated

by pressing on the brake pedal). To engage the Parking

Brake, pull upward on the hand brake lever. To release

the Parking Brake, push down on the hand brake lever.

BRAKE PEDAL

The hydraulic brake assembly is activated by pressing

on the brake pedal. This action will activate the brakes

being applied to both front wheels.

TILT STEERING LEVER

The steering wheel can be adjusted to provide the most

comfortable position for the operator. To adjust, loosen

the steering wheel by pulling up on the lever. Once

loose, adjust the steering wheel up or down. To tighten

wheel in position, push down on the lever.

MACHINE OPERATION

Содержание Armadillo 9X

































































































Результаты поиска

Содержание Armadillo 9X

Отзывы:

Похожие инструкции для Armadillo 9X

Бренды по названию

Популярные бренды

PowerBoss Armadillo 9X, Руководство пользователя

Результаты поиска

Содержание Armadillo 9X

Отзывы:

Похожие инструкции для Armadillo 9X

Бренды по названию

Популярные бренды