Power One AURORA MICRO-0.25-I-OUTD-US-208/240, Руководство пользователя, Страница: 7 / 78

Page
6
of
76 MICRO-0.25/0.3-I-OUTD-US-208/240 BCG.00612_AB
Part
1 Introduction and Safety
1.1 INTRODUCTION
This manual contains important instructions for models indicated on the front cover that shall be
followed during installation and maintenance of the inverter.
THE INSTALLER MUST READ THIS DOCUMENT IN ITS ENTIRETY BEFORE INSTALLING OR
COMMISSIONING THIS EQUIPMENT.
1.1.1 P
URPOSE
The purpose of this document is to support the qualified technician, who has received training
and/or has demonstrated skills and knowledge in construction to install and maintain this Power-
One AURORA MICRO ® grid tied inverter. This manual does not cover any details concerning
equipment connected to the inverter such as the solar modules. Information concerning the
connected equipment is available from the respective manufacturer.
This manual is a guide that will enable installers to work safely, install the MICRO system and
maintain it in good working order.
1.1.2 I
NSTALLATION
The installation is to be done by a qualified installer, normally a licensed electrician or contractor,
according to the applicable local code regulations (National Electric Code (NEC), Canadian Electric
Code (CEC), and other).
For safety reasons only a qualified electrician, who has received training and/or has demonstrated
skills and knowledge in construction and in operation of this unit, can install this inverter.
1.1.3 V
ALIDITY AND
A
VAILABLE
M
ODELS
There are two models of the MICRO, delineated by the maximum output power (0.25 kW or 0.3
kW). Each version is also available for either a 240Vac split phase or 208Vac single phase AC grid
connection.
This document applies only to the inverter models listed in Table 1-1. All model dimensions are
15.0” x 9.7” x 1.37” and weigh 3-1/2 lb (1.65kg).