Power One AURORA MICRO-0.25-I-OUTD-US-208/240, Руководство пользователя, Страница: 15 / 78

Page
14
of
76 MICRO-0.25/0.3-I-OUTD-US-208/240 BCG.00612_AB
Part
1 Introduction and Safety
1.2.2 A
PPROPRIATE USAGE
CAUTION:
Power-One
accepts NO liability for damage of any kind that may arise from incorrect
or careless operation. The equipment must not be used in ways that do not fall
within the intended field of use.
1.2.2.1
Intended or Allowed Use
This equipment is a MICRO inverter designed to transform direct current (DC) coming from a
photovoltaic module (PV) into an alternating current (AC) suitable for being fed into the power
distribution grid.
This MICRO Inverter is designed for outdoor use, but can be used indoors if installed according to
the National Electric Code and abiding by specified environmental and mounting parameters as
stated in this manual (see Environmental Conditions section 1.2.2.3 and General Installation
Conditions section 2.2.2).
1.2.2.2
Conditions of Use
The operating current output during the normal operation MUST NOT exceed the limits
documented in the technical specifications.
Only one photovoltaic module can be connected in the input of the inverter (DO NOT connect
batteries or other sources of power supply).
The inverter can be connected to the electricity grid in qualified countries ONLY.
The inverter can be used only if all the technical characteristics are observed and applied.
1.2.2.3
Environmental Conditions
Adverse environmental condition, such as: sun, rain, snow, wind, too hot or too cold, altitudes,
humidity, etc., can lead to a reduction in performance.