Power Electronics ProfiPower SD700 Type 1, Руководство пользователя

Страница: 21 / 45

POWER ELECTRONICS SD700
–
PROFIBUS
INSTALLATION AND CONNECTION
19
E
N
G
L
I
S
H
Display
Name /
Description
Range Function
Set on
RUN
2 CNTROL
MODE2=2
G4.1.2 /
Alternative
Control Mode 0-3
It allows user to set the control mode for the drive
commands (Start/Stop, Reset, ...).
OPT. DESCRIPTION FUNCTION
0 NONE
Ctrl mode 2 is not
operative
1 LOCAL
Drive controlled by
keypad.
2 REMOTE
Drive controlled through
control terminals.
3 SERIAL COMMS
Drive controlled through
communication bus.
Note : Control mode 2 will be activated through digital
inputs exclusively. To use this set one of the digital
inputs to '17

CONTROL 2'. When this input is
activated, auxiliary control mode will be activated.
NO
3.3.2. Subgroup 20.0
–
G20.0: Communications Control
This subgroup specifies the communication module to be used.
Once previous parameters are set, the subgroup [20.0] will specify
the particular communication bus to use.
Display
Name /
Description
Range Function
Set
on
RUN
1 COM.
CONTROL=0
G 20.0.1 /
Communication
Module 0-5
Set the value according to communications network
controlling the drive
Note:
This parameter is only functional after the boot up.
OPT. FUNCTION
0 Modbus
1 Profibus
2 Modbus TCP
3 Ethernet_IP
4 Can Open
5 Devicenet
SI