Power Electronics ProfiPower SD700 Type 1, Руководство пользователя

Страница: 20 / 45

SD700
–
PROFIBUS POWER ELECTRONICS
18
INSTALLATION AND CONNECTION
3.3. Parameter Setting
There are some parameter groups used to configure the operation in a
communication network:
[G4 Inputs

G4.1 Digital Inputs]
[G20 Communication Buses  G20.0 Comms Control,

G20.2 Profibus].
3.3.1. Subgroup 4.1
–
G4.1: Digital Inputs
Drive control modes need to be defined in order to cede the control
to the communication network.
Display
Name /
Description
Range Function
Set on
RUN
1 CNTROL
MODE1=1 G4.1.1 / Main
Control Mode
0-3
It allows user to set the control mode for the drive
commands (Start/Stop, Reset, ...).
OPT. DESCRIPTION FUNCTION
0 NONE
Ctrl mode 1 is not
operative
1 LOCAL
Drive is controlled by
keypad.
2 REMOTE
Drive controlled through
control terminals.
3 SERIAL COMMS
Drive controlled through
communication bus.
NO