Power Electronics ProfiPower SD700 Type 1, Руководство пользователя

Страница: 11 / 45

POWER ELECTRONICS SD700
–
PROFIBUS
SAFETY INSTRUCTIONS
9
E
N
G
L
I
S
H
WARNINGS
RECEPTION

Material of Power Electronics is carefully tested and perfectly packed
before leaving the factory.
 In the even of transport damage, please ensure that you notify the
transport agency and POWER ELECTRONICS: 902 40 20 70
(Interna34 96 136 65 57) or your nearest agent, within 24hrs
from receipt of the goods.
UNPACKING
 Make sure received merchandise corresponds with delivery note,
models and serial numbers.

Each board is supplied with a technical manual.
RECYCLING

The packing of the drives must be recycled. For this reason it is
necessary to separate different materials (plastics, paper, cardboard,
wood,) and settle them in corresponding containers.
 The residual parts of electrical devices must be collected in a selective
manner in order to warranty the correct environmental treatment.
SAFETY
 Before operating the inverter, read this manual thoroughly to gain and
understanding of the unit. If any doubt exists then please contact
POWER ELECTRONICS, (902 40 20 70 / +34 96 136 65 57) or your
nearest agent.

Wear safety glasses when operating the inverter with power applied
and the front cover is removed.
 Handle the inverter with care according to its weight.
 Install the inverter according to the instructions within this manual.

Do not place heavy objects on the inverter.

Ensure that the mounting orientation is correct.
 Do not drop the inverter or subject it to impact.
 The SD700 inverters contain static sensitive printed circuits boards.
Use static safety procedures when handling these boards.