Pottinger VITASEM A 251 Скачать руководство пользователя

Страница: 57 / 82

- 57 -

0600_GB-Power-Control_8537

POWEr COnTrOL - OPErATiOn

Press O.K. key (F)

An inquiry asks if the calibration procedure is to be
repeated.

- With “OK” (key F) the programme switches

over to “Select calibration areas” (Abdrehfläche
auswählen).

- Pressing the ESC key springs the programme back

to the menu selection “calibration trial/calibration
aid” (Abdrehprobe/Abdrehhilfe)

Calibration trial

(= Abdrehprobe)

- The calibration trial supports calibrating the seed

drill in activated seed quantity setting.

In order to obtain an exact seed quantity it must be

carried out without fail.

Using arrow keys select “Abdrehprobe” (Calibration

trial) and confirm with OK.

- Displayed is:

Seed type, seed quantity and gearing position.

- Data for this is taken from the “Seed quantity setting”

menu.

- OK will start the calibration process.
- First of all 10 rotations of the seed drive must be

made using the crank handle so that the seed boxes
are filled with seed and the grains are aligned in the
direction of flow.

The control counts the seed drive rotations and advises

when the process is finished.

Calibration menu (Abdrehen)

• Press

“ Calibration menu” key

- “Calibration” (Abdrehen) menu appears

- Select the desired menu
with "

keys

- Press

“Ok” key

- Call up highlighted menu
- Press

“ESC” key

- Indicator springs back to main menu

Menu levels

Calibration aid

(= Abdrehhilfe)

- The calibration aid is a numbers aid when calibrating

the seed drill and gives the user valuable tips for
carrying out calibration.

Using arrow keys select “calibration areas” and confirm

with OK.

- Possible areas:

1/10ha, 1/20ha, 1/40ha, 1/100ha.

The indicated crank handle rotations must be made

using the crank handle.

- The control keeps count and displays the remaining

crank handle rotations.

- An acoustic signal is heard with the last 5 crank

handle rotations to draw attention to the fact that
the turning procedure will end soon.

- When the value reaches 0 the STOP indicator

appears in the display and continuous acoustic
signal is heard.

- Calibration must now end.
- The actual crank handle rotations are shown.

Note!

Calibration serves

to determine

the exact seed

quantity.

The control “Power

Control” supports

calibration

through auxiliary

programmes.

* Remark: In

German word

usage it is normal

to use the term

„Abdrehen“

(which basically

means turning the

dosing device by

hand) instead of

„kalibrieren“ (me-
aning to calibrate,

electronically).

In this manual

we use the term

„kalibrieren“ in

order to avoid

any misunder-

standings with

text translations.

Содержание VITASEM A 251



















































































Результаты поиска

Содержание VITASEM A 251

Отзывы:

Похожие инструкции для VITASEM A 251

Бренды по названию

Популярные бренды

Pottinger VITASEM A 251, Руководство оператора

Результаты поиска

Содержание VITASEM A 251

Отзывы:

Похожие инструкции для VITASEM A 251

Бренды по названию

Популярные бренды