- 10 -
000-GB AUF- UND ABBAU_8537
GB
SET-UP AnD UnCOUPLing
Loading
Hook in with the textile belt in the middle wall opening (
2/1
) and 2
eyes (
4/1
) - at “4 m” 2x middle wall opening.
Lift only by itself and with empty hopper (without soil-working
machine).
Ensure sufficient load bearing capacity of belts.
Handle carefully, keep balanced.
Keep clear of suspended loads.
2
3
5
Set-up
The combined soil-working machine must be suitable for the
superstructure:
... sufficiently stable for carrying the seed drill, (e.g. additional supports
for Pöttinger Rotary Harrow „2.5 m“ and „ m“ wide),
.... „load bearing“ packer roller (e.g. toothed packer roller 510 mm
Ø or polygon roller 450 mm Ø).
Perform set-up on level ground and with empty hopper only.
Mount the superstructure set on the soil-working machine.
Mount the couplings on both sides (
3/1+2+3
) in such a way that
that the seed drill rests close to the packer roller and the distance
between the lower edge/coulter rail and the ground
is approx. 44
cm for operation
. (
5/1
)
Drive under the empty, supported “Vitasem A” with the soil-working
machine and couple; secure with plugs (
3/3
).
Lift the machine and remove front supports (
4/2
) then lower and
connect upper link (
5/2
).
Lift the machine again and remove back supports (
4/3
).
(The supports may remain attached to the seed drill; insert the front
supports, pointing upwards, into the holders, then insert the back
supports,
5/3
.)
Adjust the upper links so that the soil-working machine and the seed
drill are horizontal during operation (side of upper edge of hopper).
Connect the hydraulic hose - for row markers or others - to a single-
action control unit.
4
Transportation and loading components
