System Installation
ROBO-8714VG2A User’s Manual
3-12
J13: LVDS Panel Connector
PIN No.
Signal Description
PIN No.
Signal Description
1
Lower DATA0- (TXL0N)
2
Lower DATA0+(TXL0P)
3
Lower DATA1- (TXL1N)
4
Lower DATA1+(TXL1P)
5
Lower DATA2- (TXL2N)
6
Lower DATA2+(TXL2P)
7
Lower DATA3- (TXL3N)
8
Lower DATA3+(TXL3P)
9
Lower CLOCK- (TXLCN)
10
Lower CLOCK+(TXLCP)
11
Upper DATA0- (TXU0N)
12
Upper DATA0+(TXU0P)
13
Upper DATA1- (TXU1N)
14
Upper DATA1+(TXU1P)
15
Upper DATA2- (TXU2N)
16
Upper DATA2+(TXU2P)
17
Upper DATA3- (TXU3N)
18
Upper DATA3+(TXU3P)
19
Upper CLOCK- (TXUCN)
20
Upper CLOCK+(TXUCP)
Notes:
1. The signals of LVDS upper channel will be only used in dual-channel LVDS mode.
2. This panel connector (J13) should be accompanied with LVDS Panel Control
Connector (J10) and its jumper setting (JP3).
3. In general, lower channel equals odd channel and upper channel equals even
channel for different panel description.
TV Output Interface/ Pin assignment
Composite Video, S-Video and SCART R/G/B interfaces are 3 kinds of TV outputs
provided by this system. Please refer to connector J34 for more details. Each time
when the system is on, the system auto-detects one interfaces for outputting display
information.
J34: TV-out Connector
PIN No.
Signal Description
PIN No.
Signal Description
1 Ground
2 COMP/B
3 Y/G
4 C/R
5 SYNC
6 N/C
A connection to one of these three different interfaces will result different signal line
impedance combinations. The selection will be made base on the different
impedances combinations.
