Hardware Configuration
ROBO-8714VG2A User’s Manual
2-8
Notes:
1. The signals of LVDS upper channel will be only used in dual-channel LVDS mode.
2. This panel connector (J13) should be accompanied with LVDS Panel Control
Connector (J10) and its jumper setting (JP3).
3. In general, lower channel equals odd channel and upper channel equals even
channel for different panel description.
J14/J15: USB1~USB4 Connector
PIN No.
Signal Description
PIN No.
Signal Description
1 VCC
2 Ground
3 USB0-
4 Ground
5 USB0+
6 USB1+
7 Ground
8 USB1-
9 Ground
10 VCC
J16/J17 Primary/Secondary IDE Connector (IDE1/IDE2)
PIN No.
Signal Description
PIN No.
Signal Description
1 RESET#
2 Ground
3
Data 7
4
Data 8
5
Data 6
6
Data 9
7
Data 5
8
Data 10
9
Data 4
10
Data 11
11
Data 3
12
Data 12
13
Data 2
14
Data 13
15
Data 1
16
Data 14
17
Data 0
18
Data 15
19 Ground
20 N/C
21 DMA
REQ
22 Ground
23 IOW#
24 Ground
25 IOR#
26 Ground
27 IOCHRDY
28 Pull-down
29 DMA
ACK#
30 Ground
31 INT
REQ
32 N/C
33 SA1
34 CBLID#
35 SA0
36 SA2
37
HDC CS0#
38
HDC CS1#
39 HDD
Active#
40 Ground
