BIOS Setup Information
ROBO-8714VG2A User’s Manual
4-27
Resource Controlled By
BIOS can automatically configure the entire boot and plug and play compatible
devices. If you choose Auto, you cannot select IRQ DMA and memory base address
fields, since BIOS automatically assigns them.
The choice: Auto (ESCD), Manual.
IRQ Resources
When resources are controlled manually, assign each system interrupt a type,
depending on the type of device using the interrupt.
The choice: Press Enter.
Legacy ISA for devices compliant with the original PC AT bus specification,
PCI/ISA PnP for devices compliant with the plug and play standard whether
designed for PCI or ISA bus architecture
IRQ-3/IRQ-4/IRQ-5/IRQ-7/IRQ-9/IRQ-10/IRQ-11/IRQ-12/IRQ-14/IRQ-15
assigned to.
The choice: PCI Device, Reserved.
PCI/VGA Palette Snoop
The choice: Enabled, Disabled.
Assign IRQ For VGA
To enable VGA IRQ assignation by selecting enabled.
The choice: Enabled, Disabled.
INT Pin 1 Assignment
Devices (S) using this INT: Display Cntrlr – Bus 1 Dev 0 Func 0, USB 1.0/1.1 UHCI
Cntrlr – Bus 0 Dev29 Func 0.
The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, and 15.
INT Pin 2 Assignment
Devices (S) using this INT: Multimedia Device – Bus 0 Dev 31 Func 5, Simple
COMM. Cntrlr – Bus 0 Dev 31 Func 6, SMBus Cntrlr – Bus 0 Dev 31 Func 3.
The choice: Auto, 3, 4, 5, 7, 9, 10, 11, 12, 14, and 15.
