System Installation
ROBO-8714VG2A User’s Manual
3-8
3.4.5
On-Board USB 2.0 Controller
Drivers Support
Please find Intel HR USB driver in /USB20 directory of ROBO-8714VG2A CD-title.
The drivers support Windows 2000 and XP.
3.5
Clear CMOS Operation
The following table indicates how to enable/disable CMOS Clear Function hardware
circuit by putting jumpers at proper position.
JP4
Function
1-2 Short
Normal Operation
Ì
2-3 Short
Clear CMOS contents
To correctly operate CMOS Clear function, users must turn off the system, move JP4
jumper to short pin 2 and 3. To clear CMOS contents, please turn the power back on
and turn it off again for AT system, or press the toggle switch a few times for ATX
system. Move the JP4 back to 1-2 position (Normal Operation) and start the system.
Users may then follow the displayed message to load BIOS default setting.
