Portafill 4000T, Руководство пользователя

Страница: 61 / 92

62
4000T
9. Machine Stop Activation
Lights only when a Machine Stop has been
pressed by the operator - immediately shuts
down the engine. A flashing signal after shut
down indicates that the Dog lead Machine
Stop has been pressed.
10. Engine Pre-heat indicator Light
Lights only when pre-heat button is operated
during start up (if applicable).
11. Fuel Contamination Warning Light
Indicates a problem in the fuel system, e.g.
water contamination. Engine shuts down 1
second after the fault has been detected.
Hour clock - records the number of hours that
the engine has been running.
Ignition Start Switch - used to start and stop
the engine when required.
5.14 Air Breather Restriction Options
If "Air Filter Override" link is enabled on main
PCB then light remains on continuously until
fault has been repaired.
If "Air Filter Override" link is out and it
continues to receive a fault signal, the light
stays on for 30 minutes. After 30 minutes the
engine will shut down - the light will remain
on until the ignition key has been turned off
and the fault rectified.
5.15 Track Maintenance
To maintain long track life it is necessary to
carry out routine checks on your tracks.
Track Movement – It is important that the
machine is moved every day to prevent the
tracks from becoming ceased. Track the
machine forward and back 10 meters a
number of times each day to keep the tracks
free.
During the lifetime of the Tracks, wear on
some parts is inevitable. To ensure that
damage and repair costs due to wear are kept
to a minimum, it is highly recommended that
the amount of wear on certain parts is
checked regularly.
The following items should be checked for
wear on a regular basis: