Portafill 4000T, Руководство пользователя

Страница: 35 / 92

36
4000T
4.8 Preparing Machine for Operation
Observe all safety and warnings before
operating the machine and ensure there are
no hazards present.
In preparation to start using the machine,
position the unit as close to the material you
wish to screen. Make sure the machine is
placed on level ground that is firm enough to
carry the weight of the unit.
Observe the procedure to start the engine
and run engine at idle speed. On days where
the air temperature is below 5 degree Celsius
allow the machine to run on idle speed for 15
minutes to allow the hydraulic oil to reach its
operating temperature.
On days where the air temperature is above 5
degree Celsius allow the machine to run on
idle speed for 5 minutes to allow the
hydraulic oil to reach its operating
temperature.
4.9 Set Up – Control Levers Function
Before starting to try and operate the
machine you should firstly familiarize yourself
with the different hydraulic control levers and
what their functions. Each Control Lever has a
sticker indicating the function of each hand
lever. This section will help you identify their
function.
It is extremely important that if any of these
stickers are damaged or removed they must
be replaced immediately.
Drum Speed
Faster /Slower
Located inside the engine enclosure
Overzise Conveyor Speed
Faster /Slower
Located inside the engine enclosure
Feeder Conveyor Speed
Faster /Slower
Located inside the engine enclosure