Portafill 4000T, Руководство пользователя

Страница: 41 / 92

42
4000T
4.12 Operating the Screen
1. Observe all safety and warnings before
operating the machine.
2. Start the machine by going through the
Engine Start Up Procedure.
3. Set the Throttle Lever at ‘idle’ as indicated by
the ‘-‘ sign.
4. On the engine control panel there are two
control switches named CIRCUIT 1 and
CIRCUIT 2. Circuit 1 controls the Feeder,
Collection and Oversize Conveyor. Circuit 2
controls the Wing Conveyor and Screen.
5. Turn both these switches clockwise to the ON
position. This will engage all the various
conveyors and screen.
6. Now set the Throttle Lever at ‘full speed’ as
indicated by the ‘+‘ sign.
7. You are now ready to screen material.
8. The speed of the Feeder, Oversize Conveyors
and Screen can be controlled via the Variable
Speed controls.