Replacing bulbs
To avoid short circuits, turn off the respect-
ive electrical components when changing
light bulbs.
Keep bulbs free of grease and dirt. Hold
them only with a clean cloth or soft paper.
Do not use chemical cleaning agents for the
plastic lenses. Plastic lenses should only be
cleaned with water or a mild soap/water
solution.
We recommend you keep an assortment of
spare bulbs in the car.
W h e n traveling abroad, remember that some
c o u n t r i e s require spare bulbs as part of the
safety equipment.
Sealed Beam Headlights
Replacing light unit
1 - turn the ignition on
2 - t u r n light switch to position 2 to raise the
headlights
3 - turn the ignition off
4 - unscrew the 3 Philips screws (arrows)
and remove headlight c o v e r and trim ring
5 - unscrew the 3 small Philips s c r e w s from
sealed beam securing ring and remove
ring
6 - unplug w i r e s , replace sealed beam unit
and reconnect the wires
7 - reinstall sealed beam securing ring
8 - check lights
9 - reinstall trim ring and headlight cover.
63
