![Porsche 928 1979 Скачать руководство пользователя страница 59](http://html1.mh-extra.com/html/porsche/928-1979/928-1979_owners-manual_1580155059.webp)
Black arrows: Jackports for car jack
White arrows: Lifting points for workshop hoist or floor jack
Changing wheels
If you have a flat tire, move off the road.
Turn on the emergency flasher. In addition,
mark the position of your car with flares or
other warning devices to alert other motor-
ists.
Before you change a wheel, be sure the
ground is level and firm, especially near the
jack supports.
Set the parking brake and block the wheels
opposite the defective wheel on the other
side of the car.
The car jack is only to be used for changing
a wheel. Do not use it as a support to work
under the car. Never jack the car up by the
bumpers or the body. Passengers should not
remain in the car when the car is jacked up.
Sequence of operations:
1 - Loosen the wheel nuts about one turn.
Do not yet remove the nuts.
2 - Securely insert the car jack in the jack-
port located under the body. There are
t w o on each s i d e ; front and rear.
3 - To raise the car, turn the handle clock-
wise. Only raise the car as much as is
needed to change the w h e e l .
4 - Fully unscrew all wheel nuts and remove
the w h e e l .
5 - W h e n the spare wheel is in position, re-
install the nuts and handtighten them
c r o s s w i s e . Be sure the wheel nuts are
inserted with the beveled edge t o w a r d
the w h e e l . W h e n tightened crosswise, the
nuts will center the w h e e l c o r r e c t l y .
6 - Inflate the collapsible spare tire with the
air c o m p r e s s o r (refer to page 57). Check
pressure with tire pressure gauge.
7 - To lower the car, turn the jack handle
counterclockwise. Remove the jack.
8 - Firmly tighten the wheel nuts again in a
c r o s s w i s e pattern.
C o r r e c t tightness of the wheel nuts is i m -
portant. C o r r e c t l y tightened nuts should have
a torque of 94 ft. lb. (13 kpm). This torque
can be obtained with the wheel nut wrench
by any person of average s t r e n g t h . If in
doubt about the c o r r e c t tightness of w h e e l
nuts, have it checked w i t h a t o r q u e w r e n c h
by your dealer or at a service station.
58