Automatic boiler for wood pellets
Instructions for installation and operation
3) Clean the draughts of combustion products
Cleaning of smoke draughts is performed by about 20 intensive swinging movements of the lever to
its extreme positions.
Assumed interval: ……………………………………1x a week or after spent fuel cca 200 kg
Note:
It proceeds if semiautomatic cleaning of the exchanger is installed in the boiler.
7.2 MAINTENANCE
Adhere to the following principles:
1) Switch the main switch of the control unit off and disconnect the boiler from the network in case of
any maintenance work. Having the maintenance been finished, connect the boiler to the network
again and turn the main switch on.
2) If no semiautomatic cleaning is installed, we have to clean the convective surface of the
boiler body - i.e. individual parts of the exchanger and furnace.
Wire brush and cleaning equipment are used for cleaning.
We proceed as follows after having disconnected the boiler from network:
−
remove the lid of the jacket
−
dismantle the lid of the boiler body
−
remove and clean turbulators of combustion products
−
remove and clean individual parts of the ceramic extension grate
−
clean the walls of the boiler including draughts of combustion products
−
clean the surface of the burner
Assumed interval: ……………………………………1x a month or after spent fuel cca 1000 kg
Note
: Proceed in reverse order in installation of the removed parts. Be careful to place individual
parts correctly - which is necessary in relation to correct operation of the equipment.
Therefore, use specialized servicing at least for the first cleaning.
3) Continuous operation of the boiler without any interruption assumes:
- that the fuel used will not contain any inappropriate admixtures - for example: pieces of wood,
stones and metal objects which may cause troubles in transport routes
- that the fuel isn´t destroyed by humidity
Purity and required granulometry of the fuel is ensured by manufacturer. In spite of that, check its
purity at least visually when you are filling the fuel bin.
Due to the same reason, make sure that the fuel bin is covered with the lid for the whole time.
4) The following is recommended to perform after every heating season:
−
clean motor and gearbox from outside (for example: with vacuum cleaner)
−
clean the cover of fan from outside
−
clean the whole space of the boiler room from outside
this keeps pleasant ambient and the secondary dustiness is not increased
30
Содержание KP 10
Страница 1: ......