ēno play
6. With the help of an assistant, lift the whiteboard and hang it from the wall brackets.
7. Fasten the ēno interactive whiteboard to the upper wall bracket extender using the #10 x 1/2”
fasteners provided.
8. Use instructions provided with your whiteboard to complete the whiteboard installation.
Connect cables and verify amplifier operation
To finish cable connections and verify operation of the amplifier:
1. Connect the audio input cable to the audio source.
2. Connect the power plug to the AC outlet.
3. Verify the LED on the amplifier is green. Refer to “Amplifier LED status”.
4. Check that all cables are in tracks or otherwise coiled and out of the way so there is no trip or
safety hazard, and cable service loops are not visible to users.
5. If using an adjustable height mobile stand or wall mount, assure that the lift system can extend
to its full range and that no cables are pinched.
6. Assure that vibrations from loose components do not interfere with the audio.
Add foam strips to prevent unwanted vibrations
Test the sound from your system. If you detect unwanted vibrations, PolyVision provides four foam
strips for sound damping.
To damp unwanted vibrations using the foam strips provided:
1. Wrap the foam strips around loose components or wedge foam strips between components
that vibrate.
PolyVision
2002480-001 Rev C
29 of 38