ēno play
Cable routing for adjustable height mobile stand or wall mount options
Note: When installing ēno play on a whiteboard that will be mounted using an adjustable height
system,
do not connect the power or permanent audio input cable to the amplifier until after
cable routing is complete
.
The adjustable height mobile stand and adjustable height wall mount provide a variety of cable
routing options for the power and permanent audio input cable, including:
•
routing cables to sources above the whiteboard through the lift system turret within a split
corrugated conduit that is provided with the mounting solution
•
routing cables from sources below the whiteboard
•
for the adjustable height mobile stand, routing the audio input cable from a laptop tray fastened to
the back of the lift system
For more cable routing details relating to these options, refer to the installation and operation
manuals for your whiteboard mounting solution.
To route the amplifier power or permanent audio input cable when the whiteboard is mounted to an
adjustable height system:
1. Consider the locations of the power and audio sources to determine cable length
requirements, routing options, and whether to mount the amplifier on the lower left or lower
right corner of the whiteboard.
2. If the source is located above the whiteboard, route the cable down through the lift system
turret. Then route the cable from the turret base to the amplifier by passing the cable between
the lift system tubular structure and the whiteboard.
3. If the source is located below the whiteboard, route the cable from the source to the amplifier
by passing the cable between the lift system tubular structure and the whiteboard.
4. Add a cable tie to the base of the lift system, assuring a service loop between the cable tie
and the amplifier:
•
ēno 2610 requires 27” (685mm) audio and power service loop
•
ēno 2810 requires 35” (889mm) audio and power service loop
Note
: For details, refer to “Option: Cable management for adjustable height systems”.
PolyVision
2002480-001 Rev C
9 of 38